General Information - Telefunken TF-DVD5028 Instruction Manual

General Information

Troubleshooting
Below is a table describing simple measures that can help you eliminate most problems likely
to emerge when this unit is in use. If below measures do not help, turn to a service center or to the
nearest dealer.
Symptom
No sound
No image
Disc cannot be
read
Remote control
does not
operate
Some functions
do not work
Unstable image
14
14
Cause
Poor audio cable connection
Disc is dirty or damaged
MUTE function is on
Poor video cable connection
Incorrect setting of your TV set
Disc is not inserted
Disc is inserted incorrectly
Condensate on the unit laser
head
Remote control is incorrectly
directed at the unit
Distance and angle to the unit
are too large
Batteries are exhausted
Disc is recorded incorrectly
Incorrect key sequence
Static voltage on the unit
housing
Incorrect TV settings
Solution
Make proper connection
Clean the disc
Disable the MUTE function
Make proper connection
Correct the settings of your TV set
Insert the disc
Insert the disc with the label side facing up
Switch the unit on without a disc for an
hour
Use the remote controller according to the
manual
Decrease the distance and angle
Replace both batteries
Wait 5-10 seconds and the unit will
automatically return to normal playback
Repeat the operation one more time
Switch the unit off for 1-2 minutes and then
switch it on again
Correct the TV settings