Wash Temperature - Fisher & Paykel WashSmart Installation Instructions And User Manual

Changing pre-set options
US
34
CA

Wash temperature

Controlled Cold
If the temperature of your cold water supply is very low and you choose to do a COLD wash, you
will not get an effective wash. The CONTROLLED COLD option solves this problem by adding a
small amount of hot water to raise the temperature of the wash to approximately 68°F (20°C).
Enter Option Adjustment mode (refer to page 32).
1
Select the REGULAR cycle.
2
Select COLD wash temperature by touching the WASH TEMP button (if not already selected).
3
The digital display shows the temperature adjustment possible. The default setting is "tAP",
4
which is the same temperature as the incoming water from the cylinder for cold water.
Touch the MORE
to approximately 68°F (20°C).
Fig.35 Changing the cold wash temperature setting from cold faucet to CONTROLLED COLD
Note: if you always use COLD or CONTROLLED COLD water, we recommend that a WARM or HOT
wash be used regularly, eg every 5th wash should be at least a warm one. Warm water is needed
to help maintain the cleanliness of your machine.
button so "0" is displayed. Your washer will now adjust the cold temperature