Custom Program - LG Dle4901 Owner's Manual

Custom Program

If you have a special combination of settings that you
use frequently, you can save these settings as a custom
program..
* To save a custom program:
1. Turn on the dryer and turn the cycle selector knob to
select the desired cycle.
2. Use the cycle setting buttons to adjust the settings for
that cycle.
3. Press the cycle option button(s) for the option you
would like to add. A confirmation message will be
shown in the display.
4. Press and hold the Custom Program button for 3
seconds.
NOTE
You may save only one custom program at a time.
Pressing and holding the Custom Program button will
overwrite any previously saved custom program.
To recall a custom program:
1. Turn on the dryer.
2. Press the Custom Program button.
3. Press the Start/Pause button to start the cycle.
MFL62512885_en_150609.indd 29
29
HOW TO uSE
2015.6.9 3:53:17 PM