Keurig K2.0-300 series User Manual page 23

DESCALING YOUR BREWER
Before you begin, you will need a large mug, fresh water, Keurig
access to a sink. Do not use a paper cup.
set aside.
STEP 1: FIRST DESCALING SOLUTION RINSE
the empty bottle with water and pour into the Water Reservoir. Press and hold the
Power Button to turn the brewer back on.
Brew Button until 6 ounces of water has been dispensed. The brewer will automatically
stop dispensing after 6 ounces. Do not use a Keurig
the mug into the sink.
STEP 2: SECOND DESCALING SOLUTION RINSE
Let the brewer stand for at least 30 minutes while still on.
STEP 3: FRESH WATER RINSE
FILL line.
mug into the sink.
Reservoir at least one time during this process.
NOTE: If "Time to descale the brewer!" is still indicated after completing the procedure, repeat the descaling procedure above.
TM Descaling Solution into the Water Reservoir. Then fill
®
brand pack. Pour the contents of
23
SECTION 2
TM Descaling Solution and
TM Water Filter, remove and