Keurig K2.0-300 series User Manual page 19

5.
Clean the Pack Holder (1), Housing (2)
and Base (3) with a damp, soapy,
lint-free, non-abrasive cloth and
rinse thoroughly.
2.
Use a paper clip or similar tool to
loosen the clog. Rinse thoroughly with
hot water.
CLEANING THE EXIT NEEDLE
1.
If a clog arises in the exit needle, push
the lever of the Pack Holder to reveal
the exit needle.
3.
After all pieces are cleaned, place the
Base then the Pack Holder Assembly
into the Brew Head. Lower the Handle.
CAUTION: Sharp needles. Do not put fingers in chamber.
19
SECTION 2