Accessing The Extender's Gui - ActionTec WEB6000Q User Manual

Accessing the Extender's GUI

The Extender features an onboard graphical user interface (GUI) that
includes user-configurable settings. Some of these settings should be
accessed by experienced network technicians only.
To configure the network settings of the Extender:
1. Ensure that the Extender is connected to a gateway/modem, and that
both devices are powered on.
2. On a computer connected to the same network as the gateway/
modem/router and Extender, log in to the gateway/modem/router by
entering 192.168.1.254 into the address bar of a web browser.
3. The gateway/modem/router's GUI appears. The IP address of the
Extender should be displayed on the Main or Home screen of an
Actiontec gateway/modem, as indicated below.
7