ActionTec WEB6000Q Quick Start Manual

Manual Configuration of the Extender's
Wi-Fi Settings
1
Step
Use a laptop, tablet or other device to login into your Wi-Fi
Router. (If you do not know how to do this, please see the documenta-
)
tion for your Wi-Fi Router.
2
Step
Find the list of devices that are connected to your Router. This
is usually found on the main screen after logging into your Router or
under a Status Tab.
3
Step
Find a device with the name WEB6000Q. If you cannot find
a device with that name, please look for a device that has the same Mac
address as the Extender.
4
Step
Write down the IP address of the Wi-Fi Network Extender
here: _______________________.
5
Step
Open a web browser, and type in the IP address that you
wrote down under Step 4.
6
Step
Once the Home Screen appears, login into the Extender
with the user name and password found on the label on the back of the
Extender.
7
Step
Click on the Wireless Setup icon.
8
Step
Select the W-Fi band that you want to rename. Make the
adjustments and save your changes.
©2015 Actiontec Electronics, Inc. Actiontec, Creative Solutions for the Digital Life, and
the Actiontec logo are registered trademarks or trademarks of Actiontec Electronics,
Inc. Incorportated in the U.S. or other countries. All other names are properties of their
respective owners.
Product photo may differ from actual product. However, functionality remains as stated above.
Specifications are subject to change without notice.
4x4 802. 1 1ac Wireless
Network Extender
Model # WEB6000Q

Quick Start Guide

This Quick Start Guide will walk you through the easy steps to add
802.11ac Wi-Fi capabilities to your Wi-Fi network.
Here is what's included:
• (1) WEB6000Q Wireless • (1) Ethernet Cable
Network Extender
• (1) Power Adapter
(External, 12V DC, 2A
made by Actiontec,
Model# WA-24Q12FU)
NEXT