Rinnai RH - 60V Installation Manual page 2

INSTALLATION MANUAL FOR COOKER HOOD
HOW TO INSTALL
1. CAUTION BEFORE INSTALLATION
1. Check strength of wall, please install cooker hood to wall
which can hold weight of product. (15.0 kg).
(1). Wooden Wall
• When the thickness of wall is more than 20 mm,
install to wall directly.
• When the thickness of wall is less than 20 mm, fix
reinforcement first, then install cooker hood to
reinforcement.
(2). Concrete, Tail Wall
• Fix reinforcement to wall or use curl plug.
(3). Soil Wall
• Fix reinforcement to pillar first
2. Standard way of installation
Standard installation height of cooker hood 1600 mm
from floor, and 800 mm from gas cooker. (Fig.1).
INSTALLATION MANUAL FOR COOKER HOOD
NOTICE WHEN INSTALL
1. When install cooker hood, be careful that the cooker hood does not come in contact with any metal parts (the lath in the wall or the like)
of the house.
2. Do not install or mount the body of the cooker hood inside the wall because leakage current, if any, on the steel mesh inside the wall will
come in contact with the casing.
3. Use gas cooker within the width of cooker hood.
4. Do not use cooker hood by modifying switch, etc.
5. Exhaust air discharges from air discharge outlet shall not affect the flame of gas cooker.
DIMENSION OF PRODUCT
RIT-0144-4x01
PLEASE CHECK ACCESSORIES BEFORE INSTALLATION
2. PREPARATION BEFORE INSTALLATION
1.
Fix casing support
L racket casing support
Fix -B
4 screw
casing by pcs of surely. (Fig. 2)
( screw
Please take out which is fixed to body)
2. Exhaust
Fix
:
For RH-60V/RH71V/RH-90V
RH-60VI/RH-71VI/RH-90VI
RH-60EV/RH71EV/RH-90EV
RH-60EVI/RH-71EVI/RH-90EVI
Put soft tape to exhaust, insert exhaust to
notch part of casing surely, and then turn it
clockwise until stop, fix by 1 pc od screw. (Fig.3)
(Please take out screw which is fixed to body)
3. INSTALLATION OF COOKER HOOD
1. Using Casing Support (L-Bracket)
1. Thrust screw fisher into wall.
Thrust screw fisher (Ø5.1 x 25) to
temporary position of fixing at fig. -1
(RHS, LHS each 1 pc) 5 mm from wall
surface. (Fig. 4)
2. Install Casing (Fig. 5)
1. Fix hang hole of casing support
with screw fisher.
2. Tighten screw of casing firmly.
3. Tighten screw fisher of wall firmly
(Ø5.1 x 25)
2. Direct installation to ceiling
1. Thrust screw fisher into the ceiling
Thrust screw fisher (Ø5.1 x 25) to
temporary fixing position on ceiling
(R/L each 1 pc) 5 mm from the ceiling
surface (Fig. 6)
Fig. 1
(FOR RH - 60V / RH - 71V / RH - 90V)
(FOR RH - 60VI / RH - 71VI / RH - 90VI)
(FOR RH - 60EV / RH - 71EV / RH - 90EV)
(FOR RH - 60EVI / RH - 71EVI / RH - 90EVI)
Screw
to upper part of
Casing
Support
Fig. 2
Screw
Exhaust
Fig. 3
Soft Tape
Notch Part
5
Fig. 4
Screw Fisher
Fig. 5
Fig. 6
2. Remove Oil Panel
Release 3 pcs of screw ( . Fig . 7)
3. Install casing on ceiling
(1). Hang the casing on the ceiling
with screw fisher through the
hang hole of upper part of
casing.
(2). Tighten screw fisher (Ø5.1 x 25
2 pcs.) to wall through hang
hole of back of casing surely.
(Fig. 8)
(3). Tighten screw fisher to ceiling
surely. (Fig. 8)
3. Installation using slide rail
1. Insert casing on slide rail (Fig. 9)
insert fully to inside.
4. CONNECTING DUCT PARTS
For : RH-60V/RH-71V/RH-90V
RH-60VI/RH-71VI/RH-90VI
RH-60EV/RH-71EV/RH-90EV
RH-60EVI/RH-71EVI/RH-90EVI
• Connect exhaust and exhaust duct by
using Ø150 flexible duct. (Fig. 10)
• Do not use too long flexible duct because
pressure can reduce.
5. TRIAL OPERATION
1. Electric Supply
Insert electric power plug to outlet.
2. Trial Operation
Try the function by pushing each switch button, check
exhaust condition and whether there's vibration noise.
PARTS NAME
AC Power Cord
Switch
Rectifier Panel
ACCESSORIES
PART NAME SKETCH
L - BRACKET
2 pcs
(Ø5,1 x 25)
SCREW
4 pcs
FISHER
(Ø5 x 40)
2 pcs
EXHAUST
For :
RH-60V/RH-71V/RH-90V
RH-60VI/RH-71VI/RH-90VI
RH-60EV/RH-71EV/RH-90EV
RH-60EVI/RH-71EVI/RH-90EVI
SOFT TAPE
For :
RH-60V/RH-71V/RH-90V
RH-60VI/RH-71VI/RH-90VI
RH-60EV/RH-71EV/RH-90EV
RH-60EVI/RH-71EVI/RH-90EVI
ENGLISH
Oil Panel
Screws
Fig. 7
Screw Fisher
Fig. 8
Screw Fisher
Slide Rail
Fig. 9
Exhaust
Flexible
Duct
Duct
Exhaust
Fig. 10
Casing
USAGE
USE FOR
FIXING
CASING
USE FOR
FIXING
WOODEN
WALL
USE FOR
FIXING
CONCRETE
WALL
USE FOR
CONNECTING
CASING AND
1 pc
DUCT
USE FOR
COVERING
GAP OF
EXHAUST
1 pc
AND DUCT