Behringer X AIR XR16 Quick Start Manual page 11

20 X AIR XR16/XR12
X AIR XR16/XR12 Network Connection
Step 3: Net work Getting Started
(EN)
Connection
First Wifi remote connection to your
X AIR mixer
1. Download and install the remote
control app for your device.
• Android smartphones/tablets:
X AIR Android from the Google
Play* store
• iPad: X AIR for iPad from the
App Store
• PC: X AIR EDIT for Windows*,
Mac or Linux from behringer.com
2. Set the REMOTE switch on your X AIR
mixer to ACCESS POINT mode and
power on the mixer.
3. Reset your X AIR mixer's network
settings to default values by holding
the RESET button for 2 seconds.
This is located in the small hole
above the Wifi icon and requires a
paper clip or similar tool to reach.
4. Switch your remote control device on
and open the network settings.
*App Store is a service mark of Apple Inc. Google Play is a trademark of Google Inc. Windows is either a registered trademark or
trademark of Microsoft Corporation in the United States and/or other countries.
Android smartphones/tablets:
1. Start the Settings/Wireless
& Networks dialog on your
Android system.
2. Switch 'Wifi ' on.
3. Click on 'Wifi ' to select a network.
From the list of networks,
select your X AIR mixer's name,
e.g. "XR16-19-1B-07". After a few
seconds, the status should change
to 'Connected'.
4. Open your X AIR for Android app and
it will show similar information:
• Mix Access = All
• IP Address = 192.168.1.1
• Wifi Lock = None
• Wifi connected to XR16-19-1B-07
5. You may choose to lock the
connection to this specifi c Wifi
network if you want to ensure that
your device cannot automatically
connect to another network while
you are controlling your mixer.
6. Click on 'Connect' and tap on the
mixer's name in order to connect the
app with your mixer.
Note - if a warning pops up telling
you that the mixer fi rmware is not
supported, it is recommended to
update the fi rmware to the latest
version (see the XR16/XR12 pages on
behringer.com for details). You can,
however, choose to connect anyway.
7. Once the app is connected to your
mixer, all parameters will be loaded
automatically. Enjoy exploring
all mixing functions of your X AIR
mixer remotely!
21 Quick Start Guide
iPad: PC: X AIR EDIT for Windows,
Mac or Linux
1. Start the Settings/Wifi dialog on
1. Open the Wireless Network
your iOS.
Connections dialog on your
2. Switch 'Wifi ' on.
operating system.
3. Select your X AIR mixer's name
2. Make sure the 'WLAN' or 'Wifi '
from the list of networks, e.g.
adapter is switched on.
"XR16-19-1B-07". After a couple of
seconds, the status should change 3. View the list of wireless networks
to 'Connected', indicated by a and select your X AIR mixer's name,
check mark. e.g. "XR16-19-1B-07". After a
couple of seconds, the status should
4. Open your X AIR for iPad app and
change to 'Connected', indicated by
it will show any X AIR mixers
a check mark.
('Devices') found in that network,
with their IP address, which in this
4. Open your X AIR Editor for Win/
case is 192.168.1.1.
Mac/Linux and click on 'Setup'.
The list will show any X AIR mixers
5. Tap on the mixer's icon to connect
found in that network, with their
the app with your mixer.
name and IP address, which in this
Note - if a warning pops up telling
case is 192.168.1.1.
you that the mixer fi rmware is not
supported, it is recommended to 5. Click on your mixer's name, e.g.
update the fi rmware to the latest "XR16-19-1B-07", and confi rm to
version (see the XR16/XR12 pages
synchronize from mixer to PC in
on behringer.com for details).
order to connect the app with your
You can, however, choose to
mixer. If a warning pops up telling
connect anyway. you that the mixer fi rmware is not
supported, it is recommended to
6. Once the app is connected to your
update the fi rmware to the latest
mixer, all parameters will be loaded
version (see the XR16/XR12 pages
automatically. Enjoy exploring
on behringer.com for details).
all mixing functions of your X AIR
You can, however, choose to
mixer remotely!
connect anyway.
6. Once the app is connected to
your mixer, all parameters will
be transferred automatically.
Enjoy exploring all mixing functions
of your X AIR mixer remotely!