Cleaning Recommendations - Thermador PRD364JDGU Use And Care Manual

Cleaning Recommendations

PART/MATERIAL
Brass Burner Base and Cast Iron Cap
Igniters
Ceramic
Control Knobs/ Metal
Bezels/ Chrome
®
Full Access Oven Racks/ Chrome
Exterior Finish/Backguard
Stainless Steel
English 38
• A stiff nylon bristle tooth brush can be used to clean port openings.
• After cleaning, make sure that the STAR
on the STAR burner base.
• DO NOT scratch or gouge the port openings of burner cap.
• Suggested cleaners; rinse and dry immediately:
-- Hot water and detergent
®
-- Bon-ami
®
-- Cameo Aluminum and Stainless Steel Cleaner
®
-- Wright's All Purpose Brass Polish
®
-- Kleen King
• DO NOT use sharp tools to scrape the igniters. The igniters are fragile. If
an igniter is damaged, it may not light the burner.
• Suggested cleaners:
-- Cotton swab dampened with soapy water
®
-- Fantastik
• Do not soak knobs.
• Do not force knobs onto wrong valve shaft.
• Suggested cleaners; rinse and dry immediately:
-- Hot water and detergent
• Stainless steel resists most food stains and pit marks providing the
surface is kept clean and protected. Never allow food stains or salt to
remain on stainless steel for any length of time.
• Rub lightly in the direction of polish lines.
• Chlorine or chlorine compounds in some cleaners are corrosive to
stainless steel. Check ingredients on label.
• Suggested cleaners; rinse and dry immediately:
-- Hot water and detergent
®
-- Fantastik
®
-- Siege Stainless Steel and Aluminum Cleaner
®
-- Kleen King Stainless Steel Liquid Cleaner
-- Cleaner polish: Stainless Steel Magic
staining and pitting; enhances appearance.
-- THERMADOR Stainless Steel Conditioner (00576697)
-- For hard water spots use household vinegar.
• For heat discoloration; rinse and dry immediately:
®
-- Cameo
-- Barkeepers Friend
®
-- Zud
®
-- Wright's All Purpose Brass Polish
CLEANING NOTES
®
burner cap is correctly seated
®
to protect the finish from
®