Page 2
Precautions • Liquids - Do not expose your device to liquids or extreme humidity. Liquids can get into the product’s circuits, leading to damage and corrosion. If it does get wet, don’t try to accelerate drying with the use of an oven or dryer, as this may damage the device. • Extreme heat/cold – Avoid placing your device near a heat source or in direct sunlight. Extreme temperatures can cause the battery to swell, leak or malfunction. • Cleaning – Use a clean cotton cloth. Don’t use alcohol or other cleaning solutions. • Never place the device over other electronic devices. • Do not attempt to repair or take apart the device by yourself. Contact 5LINX ® customer service for assistance: 5linxpowerplay@5linx.com Included Accesories A. Micro USB to USB Cable B. US AC to USB Power Charger Adapter Plug...
Pictures are for illustration purposes only. Actual items may slightly vary in appearance and design. Device Overview USB Charging output Jack & Light Red Indicator Light – Power indicator G reen Indicator Light – Charger indicator Blue Indicator Light Bluetooth Indicator Device Power on/off switch Push key 3 seconds Batter y life Charging indicator...
Battery Management Connect the Micro USB cable (included) to the Micro USB port on the PowerPlay and connect the USB Cable to the Power Charger Adapter Plug. Plug the Adapter Plug into an electrical wall outlet to fully charge the battery (approx. 8 hours). Red indicator light is on while charging and will turn off when fully charged. Do not charge additional devices while charging the PowerPlay, this will damage the device. 4. T he number indicates % of battery life on PowerPlay.
Page 5
Pairing your Bluetooth enabled device to your PowerPlay PowerPlay doesn’t work with all apps. Go to your mobile device’s Network Settings. Set your Bluetooth device to discover. Follow your device’s instruction guide. This usually involves going into a “setup”, “connect” or “Bluetooth” menu. Step 1 iPhone...
Page 9
Push key 3 seconds to turn on Bluetooth. Locate the PowerPlay on your Bluetooth device & select “PowerPlay” from the list. Key in password “0000”. Your PowerPlay will beep when pairing is complete. Using key to play and pause music playing. Step 3 iPhone Settings>Bluetooth>Devices...
Charging Devices Connect the USB end of the charging cable that came with your mobile device to the OUT port on the PowerPlay. Connect the micro USB end to your mobile device. During charging, the red indicator light will stay on.
Hands-free calling Make, receive and end call by pushing botton. Control volume by using PowerPlay When not using the PowerPlay bluetooth, press botton 3 seconds to turn off to save power.
Page 14
Specs • Weight < 7.4 ounces • • Size: 4.65 inches (L)*1.54 inches (W)*1.54 inches (H) • Rechargeable Battery: Lithium - polymer 3.7V 5200 mAh • • Power Consumption: DC5V/500mA ~1A • • Super High Capacity Rechargeable • Battery 5200mAh, about 300% of smartphone battery life • Speaker Frequency: 100Hz ~ 20KHZ • • Frequency Range: 2.4000Ghz-2.480 GHz • Input/Output voltage: 5V • Signal and noise ratio: ≥75dB • Power of loudspeaker: 2W*2 • Charging time – Approximately 8 hours • Playing time – Approximately 32 hours (volume at 60%) • Hands-free calling – Bluetooth connector • LED indicator Light for Bluetooth • Effective Distance – up to 33 feet...
Troubleshooting No Sound • Make sure the mobile device is not on mute and your volume is turned up. Bluetooth Connection • Ensure that the speaker and mobile device are within 33 feet of each other. • Ensure mobile device is still paired with your PowerPlay. No Power • Device needs to be charged. Connect the device to a USB port and the power adaptor.