Location Of User's Control - Sharp 27F543 Service Manual

27F543
Front Panel
POWER
Press → On.
Press again → Off.
REMOTE CONTROL
SENSOR
MENU
Press → Accesses MAIN MENU.
Press again → Exits MAIN MENU.
Basic Remote Control Functions
POWER
Press → On.
Press again → Off.
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your favorite
programs by using the 4 categories A,
B, C and D. The channels can be
accessed quickly by using these
buttons.
VOLUME UP/DOWN
+
( ) Increases sound.
( ) Decreases sound.
Changes or selects the TV
adjustments on On-Screen Display.
MENU
Press → Accesses MAIN MENU.
Press again → Exits MAIN MENU.
CATV/DVD-TV/VCR MODE
SELECT SWITCH
In TV/VCR position, signals sent will be
for TV and VCR control.
In CATV/DVD position, signals sent will
be for cable TV converter and DVD
control.
DVD/VCR CONTROL
Note:
The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the
remote control, place it under a fluorescent light or other lighting.
The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
The degree of illumination will vary depending on the strength of lighting used.
The degree of illumination will decrease with time and depending on the temperature.
The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
Sunlight and fluorescent lighting are the most effective when charging the display.

LOCATION OF USER'S CONTROL

VOLUME UP/DOWN
+
( ) Increases sound.
( —) Decreases sound.
POWER
TV
1
4
7
FLASHBACK
PERSONAL PREFERENCE
A B
VOL
MENU
REW
PAUSE
PIP
SWAP FREEZE
TV ¥ CATV ¥ VCR ¥ DVD
INSIDE DOOR
VIDEO/AUDIO
TERMINALS
CHANNEL UP/DOWN
(') Selects next higher channel.
( " ) Selects next lower channel.
Infrared Transmitter Window
DISPLAY
Press → Displays receiving channel for
4 seconds.
DVD
Press again → Removes display.
VCR DISPLAY INPUT
Temporarily displays receiving
channel when in Closed Caption
2 3
mode.
5 6
INPUT
Press → Switches to external video
8 9
INPUT 1 mode.
ENTER
Press twice → Switches to external
0 100
video INPUT 2 mode.
Press 3 times → Switches to external
C D
video INPUT 3 mode or COMPONENT
mode.
CH
Press 4 times → Switches back to the
VOL
+
CH original TV mode.
MUTE
ENTER
CATV TV
Used in some instances where a Cable
Converter Box requires an enter
DVD VCR
command after selecting channels,
when using the REMOTE KEYPAD
PLAY FF
button.
CH/SKIP
STOP REC
CHANNEL UP/DOWN
'
( ) Selects next higher channel.
"
( ) Selects next lower channel.
MOVE SELECT
Moves the
screens.
MUTE
Press → Mutes sound.
Press again → Restores sound.
When sound is muted, CLOSED
CAPTION appears if available.
4
IN 2
mark on the MENU