Brief Instructions - Miele TX2349 Quick Start Manual

Brief instructions

A Filling the salt reservoir F
^ Remove the lower basket and
unscrew the salt reservoir cap.
Water or saline solution will run out
of the reservoir when the cap is
removed. It should therefore only be
removed in order to refill the salt
reservoir.
,
Inadvertently filling the salt
reservoir with cooking salt, rinse aid,
powder or liquid dishwasher
detergent will damage the water
softener unit.
^ Place the funnel provided over the
salt reservoir and carefully fill with
dishwasher salt until the reservoir is
full. The salt reservoir holds approx.
2 kg of salt.
^ Clean any excess salt from around
the reservoir opening and then screw
the cap on again firmly.
^ Run the "Gentle 45 °C" programme
with the "Turbo" function immediately
(without any crockery in the
dishwasher) to remove any traces of
salt from the cabinet.
B Adding rinse aid (
^ Press the button on the lid of the
rinse aid reservoir in the direction of
the arrow until the flap springs open.
^ Add rinse aid only until it is visible in
the opening.
^ Close the flap firmly. It should click
into place.
^ Wipe up any spilled rinse aid. This
prevents over-foaming occurring
during the next programme.
C Load the dishwasher
D Adding detergent 8
^ Follow the dosage recommended by
the manufacturer on the packaging.
^ Press the button on the lid of the
detergent compartment in the
direction of the arrow until the flap
springs open.
The flap is always open at the end of a
programme.
^ Add the required amount of
detergent and close the flap.