Printer Sharing; Connecting The Lbp-800 As A Network Printer - Canon LBP-800 User Manual

Printer Sharing

Printer sharing enables printing from network clients. Printer sharing
with an LBP-800 printer requires that both the print server and the client
devices are using Windows 95 or later, or Windows NT 4.0 or later. The
print server and client do not need to use the same operating system, and
it is possible to print from a Windows 95/98 client to a Windows NT 4.0/
2000 print server, or vice versa.
You can start printing simply by starting the server, even if the server was
not running when the client was started.
If the server is running on Windows NT 4.0/2000, you can print, even if
no one is logged into the server. Please note that there is no status display
on the server when no one is logged in. The status display is shown on the
client.

Connecting the LBP-800 as a Network Printer

If you plan to share the LBP-800 on a network, install the print server
locally, then make the following settings. See your print server system
documentation for more information.
Windows 95/98 Server Settings
Network Settings
1.
2.
3.
4.
5.
6.
Be sure there is a check by "I want to be able to allow others to print to
my printer(s)."
7.
42
Using the Canon Advanced Printing Technology
Double-click the Network icon in the Control Panel.
Select the Configuration tab, then click Add.
Select Service, then click Add.
Select Microsoft in the Manufacturers list box.
Select File and Printer Sharing for Microsoft Networks in the
Network Services box, then click OK.
Click File and Print Sharing.
Select the Access Control tab and check either "Share-level Access
Control" or "User-level Access control."
Chapter 3