Using The Pc Settings - Toshiba 58L9300 Series Owner's Manual

The following signals can be displayed:
VGA: VESA 640 x 480 @ 60/72/75 Hz
S-VGA: VESA 800 x 600 @ 56/60/72/75 Hz
XGA: VESA 1024 x 768 @ 60/70/75 Hz
W-XGA: VESA 1280 x 768 @ 60/75 Hz
W-XGA: 1280 x 800 @ 60/75 Hz
W-XGA: VESA 1360 x 768 @ 60 Hz
W-XGA+: 1440 x 900 @ 60 Hz
S-XGA: VESA 1280 x 1024 @ 60 Hz
1920 x 1080p @ 60 Hz (Horizontal Frequency: 67.5
kHz (H), Pixel Clock Frequency: 148.5 MHz)
NOTE:
• Some PC models cannot be connected to this TV.
• If connecting a certain PC model that signal is
particular, the PC signal may not be detected
correctly.
• There is no need to use an adapter for computers
with DOS/V compatible mini D-sub 15 pin terminal.
• A bar may appear in the upper, lower, right or left
side of the screen, or parts of the picture may be
obscured depending on some signals. This is not the
malfunction.
• If the edges of the picture are stretched, readjust the
picture position adjustments in the PC Settings
menu.
• Depending on the specifi cation of the PC you are
playing the DVD-Video on, and the DVD's title, some
scenes may be skipped, or you may not be able to
pause during multi-angle scenes.
To connect a PC to the HDMI terminal on the TV:
When connecting a PC to the HDMI terminal on the
TV, use an HDMI-to DVI adapter cable and analogue
audio cables.
If connecting a PC with an HDMI terminal, use an
HDMI cable (type A connector). Separate analogue
audio cables are not necessary.
TV back view
Computer
Connecting your TV
TV side view
Audio cable for
PC-to-TV
connection
NOTE:
• The edges of the images may be hidden.
• If connecting a certain PC model that signal is
particular, the PC signal may not be detected
correctly.
Signal names for mini D-sub 15 pin connector
Pin assignment for RGB/PC terminal
Pin No. Signal name
1 R
2 G
3 B
NC (not connected) 12
4
5 Ground
6 Ground
7 Ground
8 Ground

Using the PC Settings

• First press o until the video input mode list
appears on the screen, then press  or  and OK
in order to select the PC input mode.
• This function may not be available for some signal
or if no signal is received.
• The optimum points of the Clock Phase
and Sampling Clock adjustments may be
incomprehensible according to the input signals.
Adjusting the picture position
1
Press MENU and  /  to select Picture icon.
2
Press  and  /  to select Display Settings
and press OK.
3
Press  /  to select PC Settings and press OK.
< Display Settings
Auto Format
4:3 Stretch
Picture Position
PC Settings
Pin No. Signal name
9 NC
10 Ground
11 NC
DDC Data
13 H-sync
14 V-sync
15 DDC Clock
On
Off
43