Storage After Use - Echo CS-800P Operator's Manual

• Inspect and adjust every part of the chain saw.
- Completely clean every part and repair if
necessary.
- Apply thin coating of oil on metal parts to
prevent rust.
• Remove chain and guide bar.
• Drain fuel tank, pull starter slowly a few times to
drain fuel from carburetor.
• Pour a small amount of clean motor oil into spark
plug hole, pull starter and crank the engine until
piston reaches: TOP DEAD CENTER.
• Store in a dry area, free from dust.

STORAGE AFTER USE

31
WARNING
Do not store in an enclosure where fuel
fumes may accumlate or reach an open flame
or spark.
CAUTION
Do not lend or rent your chain saw without
the Operator's Manual and Safety Manual.
NOTICE
• For future reference, you should keep this
Operator's Manual and the Safety Manual.
• If this Operator' Manual or the Safety Manual
has become illegible or is lost, please purchase
a new one from your ECHO dealer.
CS-800P