Playing The Recorded Programme (Title List); Displaying The Playing/Remaining Time And Play - Sony RDR-HX520 Service Manual

4
Press z REC.
Recording starts.
Recording stops automatically after 8
hours of continuous recording or when
the HDD or DVD is full.
To stop recording
Press x REC STOP.
Note that it may take a few seconds for
recorder to stop recording.
To watch another TV programme while
recording
If your TV is connected to the i LINE 1 –
TV jack, set your TV to the TV input using
the TV/DVD button and select the
programme you want to watch. If your TV is
connected to the LINE 2 OUT or
COMPONENT VIDEO OUT jacks, set the
TV to TV input using the TV t button
(page 17).
TV Direct Rec
If you are using the SMARTLINK
connection, you can easily record what you
are watching on your TV.
When the TV is turned on, press z REC. The
recorder automatically turns on and starts
recording what you are watching on the TV.
b
Note
If "TV" appears in the front panel display, you
cannot turn off the TV or change the programme
position during TV Direct Rec. To turn off the
function, set "TV Direct Rec" to "Off" in the
"Recording" setup (page 93).
About the Teletext function
Some broadcast systems ensure a Teletext
service* in which the complete programmes
and their data (title, date, programme
position, recording start time etc.) are stored
day by day. When recording a programme,
the recorder automatically takes the
programme name from the Teletext pages
and stores it as the title name. For details, see
"Auto Programme Title Labelling (TV Guide
Page)" on page 86.
Note that the Teletext information will not
appear on your TV screen. To view the
Teletext information on your TV screen,
press TV/DVD on the remote to switch the
input source to your TV (page 17).
* not available in some areas
28
3
Select a title, and press ENTER.
The sub-menu appears.
The sub-menu displays options
applicable only to the selected item. The
displayed options differ depending upon
the model, situation, and disc type.
Sub-menu
4
Select "Play," and press ENTER.
Playback starts from the selected title.
To stop playback
Press x (stop).
To scroll the list display by page (Page
mode)
Press while the list display is turned
/
on. Each time you press , the entire
/
Title List changes to the next/previous page
of titles.
About the Title List for HDD/DVD-RWs/
DVD-Rs (VR mode)
You can switch the Title List to show
Original or Playlist titles.
While the Title List menu is turned on, press
</,.
30
b
Notes
• After pressing z REC, it may take a short while
to start recording.
• You cannot change the recording mode while
recording.
• If there is a power failure, the programme you are
recording may be erased.
• You cannot watch a PAY-TV/Canal Plus
programme while recording another PAY-TV/
Canal Plus programme.
• To use the TV Direct Rec function, you must first
correctly set the recorder's clock.
Checking the disc status while
recording
You can check the recording information
such as recording time or disc type.
Press DISPLAY during recording.
The recording information appears.
A Disc type/format
B Recording status
C Recording mode
D Recording time
Press DISPLAY to turn off the display.
To change the title order (Sort)
While the Title List menu is turned on, press
OPTIONS to select "Sort Titles." Press M/m
to select the item, and press ENTER.
Order Sorted
By Date In order of when the titles
were recorded. The title that is
recorded most recently is
listed at the top.
By Title In alphabetical order.
By Number In order of recorded title
number.
Unseen Title In order of when the titles
(HDD only) were recorded. The title that is
recorded most recently and
has not been played is listed at
the top. Playlist titles are not
displayed.
To change a title thumbnail picture
(Thumbnail) (HDD/DVD-RW/DVD-R in VR
mode only)
You can select a favourite scene for the
thumbnail picture shown in the Title List
menu.
1
Press TITLE LIST.
Press </, to switch the Title Lists, if
necessary.
2
Select a title, and press ENTER.
The sub-menu appears.
3
Select "Set Thumbnail," and press
ENTER.
The display for setting the thumbnail
point appears and the title starts to play.
4
While watching the playback picture,
press m/M to select the scene you
want to set for a thumbnail picture, and
press ENTER.
Playback pauses.
5
Press ENTER if the scene is correct.
If the scene is incorrect, press c/C to
select the scene you want to set for a
thumbnail picture, and press ENTER.
The display asks for confirmation.
• To change the thumbnail, press M.
6
Select "OK," and press ENTER.
The scene is set for the title's thumbnail
picture.
1-7
3. Playing the Recorded
Programme (Title List)
HDD + RW - RW - RW + R
VR
Video
- R - R
VR
Video
To play a recorded title, select the title from
the Title List.
HDD DVD
TITLE LIST
</M/m/,,
ENTER
OPTIONS
/
CM
mc
A Disc type:
x
B Disc space (remainder/total)
1
Press HDD or DVD. C Title information:
If you select DVD, insert a DVD (see "1.
Inserting a Disc" on page 27).
Playback starts automatically depending
on the disc.
2
Press TITLE LIST.
To show the extended Title List, press
OPTIONS to select "Display List," and
press ENTER.
D Scroll bar:
E Title's thumbnail picture:
To turn off the Title List
4. Displaying the
Press TITLE LIST.
Playing/Remaining Time
z Hints
• After recording, the first scene of the recording
and Play Information
(the title) is automatically set as the thumbnail
picture.
• You can select "TITLE LIST" from the System
HDD
Menu.
- R
b
Notes
DATA DVD
• The title names may not appear for DVDs created
You can check the playing time and
on other DVD recorders.
• It may take a few seconds for the thumbnail remaining time of the current title, chapter,
pictures to be displayed.
track, or disc. Also, you can check the disc
• After editing, the title thumbnail picture may
name recorded on the DVD/CD.
change to the first scene of the recording (title).
• After dubbing, the title thumbnail picture set on
the source recording is cancelled.
TIME/TEXT
Press DISPLAY.
The displays differ depending on the disc
type or playing status.
A Title number/name
Title List with Thumbnail Images
(Example: DVD+RW)
m
Extended Title List
Displays the media type, HDD or DVD.
Also displays the title type (Original or
Playlist) for HDD or DVD-RW/DVD-R
(VR mode) disc titles.
Displays the title number, title name, and
recording date. Title size is shown in the
Thumbnail title list.
z (red): Indicates that the title is
currently being recorded.
: Indicates that the title is currently
being dubbed.
: Indicates the protected title.
"NEW" (or N): Indicates that the title is
newly recorded (not played back) (HDD
only).
: Indicates titles containing "Copy-
Once" copy protection signals (HDD
only) (page 73).
Appears when all of the titles do not fit
on the list. To view the hidden titles,
press M/m.
The still images for each title are
displayed.
,continued
29
+ RW - RW - RW + R
VR
Video
- R
DVD VCD CD
VR
Video
DATA CD
DISPLAY
ENTER
OPTIONS
(Shows either track number, track
name, scene number, or file name for
CDs, VIDEO CDs, DATA DVDs, or
DATA CDs.)
,continued
31