Acura MDX Owner's Manual page 84

Indicator Name
Blind Spot
Information (BSI)
Indicator *
Collision
Mitigation Brake
System
TM
(CMBS TM )
Indicator *
* Not available on all models
On/Blinking
Comes on for a few seconds when
●
you set the power mode to ON,
then goes off.
Stays on while BSI is turned off.
●
Comes on when mud, snow, or ice
●
accumulates in the vicinity of
sensor.
Comes on if there is a problem with
●
the system.
Comes on for a few seconds when
●
you set the power mode to ON,
then goes off.
Comes on when you deactivate the
●
CMBS TM . A MID message appears
for a few seconds.
Comes on if there is a problem with
●
the CMBS TM .
Explanation
—
Comes on while driving - Remove the
●
obstacle in the vicinity of sensor.
2 Blind Spot Information (BSI) System
P. 365
Comes on while driving - Have your
●
vehicle checked by a dealer.
Stays on constantly without the
●
CMBS TM off - Have your vehicle checked
by a dealer.
2 Collision Mitigation Braking System
(CMBS TM ) * P. 375
uuIndicatorsu
Message
*
TM
83