Operating The Switches Around The Steering Wheel; Engine Start/Stop Button - Acura MDX Owner's Manual

Operating the Switches Around the Steering Wheel

ENGINE START/STOP Button

■
Changing the Power Mode
Indicator
VEHICLE OFF (LOCK)
Indicator in the button is off.
The steering wheel is locked. The power to all electrical
components is turned off.
ACCESSORY
Indicator in the button is on.
Indicator in the button blinks (from ON to ACCESSORY).
Operate the audio system and other accessories in this
position.
ON
Indicator in the button is on.
All electrical components can be used.
Without pressing the brake pedal
Press the button without the
shift lever in .
P (
Shift to , then press the button.
( P
Press the button.
Continued
1ENGINE START/STOP Button
ENGINE START/STOP Button Operating Range
Operating Range
You can start the engine when the keyless access
remote is inside the vehicle.
The engine may also run if the keyless access remote
is close to the door or window, even if it is outside the
vehicle.
ON mode:
Indicator in the button is off, if the engine is running.
If the keyless access remote battery is weak, beeper
sounds and the To Start, Hold Remote Near Start
Button message appears on the MID.
2 If the Keyless Access Remote Battery is
Weak P. 463
If the power mode does not change from VEHICLE
OFF to ACCESSORY, press the ENGINE START/STOP
button while moving the steering wheel left and
right. The steering wheel will unlock, allowing the
mode to change.
141