Treadmill Operation - Pro-Form 590 HR PETL55132 User Manual

TREADMILL OPERATION

THE PERFORMANT LUBE WALKING BELT
TM
Your treadmill features a walking belt coated with PERFORMANT LUBE
TANT: Never apply silicone spray or other substances to the walking belt or the walking platform. Such
substances will deteriorate the walking belt and cause excessive wear.
HOW TO PLUG IN THE POWER CORD
This product must be earthed. If it should malfunction or break
down, earthing provides a path of least resistance for electric cur-
rent to reduce the risk of electric shock. This product is equipped
with a power cord having an equipment-earthing conductor and a
earthing plug.
Two power cords are included. Select the one that will fit your
outlet. See drawing 1. Plug the indicated end of the power cord
into the socket on the treadmill. Next, lift the tab on the ferrite
box and clamp the ferrite box around the power cord. Fasten
the included plastic tie just behind the ferrite box and cut off the
excess plastic tie. The plastic tie will prevent the ferrite box
from sliding along the power cord. See drawing 2. Plug the
power cord into an appropriate outlet that is properly installed
and earthed in accordance with all local codes and ordinances.
Important: The treadmill is not compatible with GFCI-equipped
outlets.
Important: If the power cord is damaged, it must be replaced with a
manufacturer-recommended power cord.
DANGER:
Improper connection of the equipment-earthing conductor can result in an in-
creased risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as
to whether the product is properly earthed. Do not modify the plug provided with the product—if it will
not fit the outlet, have a proper outlet installed by a qualified electrician.
TM , a high-performance lubricant. IMPOR-
1
Socket on treadmill
Ferrite Box
Plastic Tie
Tab
2
Outlet
10
THE INFORMATION MODE/DEMO MODE
The console features an information mode that keeps
track of the total number of hours that the treadmill has
been used and the total number of miles that the walk-
ing belt has moved. The information mode also allows
you to switch the console from miles per hour to kilo-
metres per hour. In addition, the information mode al-
lows you to turn on and turn off the demo mode.
To select the information mode, hold down the Stop
button whilst inserting the key into the console. When
the information mode is selected, the following informa-
tion will be shown:
The Time display will show
the total number of hours the
treadmill has been used.
The Distance display will
show the total number of
miles (or kilometres) that the
walking belt has moved.
An "E" for English or an "M"
for metric will appear in the
Speed display. Press the
Speed + button to change the
unit of measurement.
IMPORTANT: The Heart Rate display should be
blank. If a "d" appears in the display, the console is in
the "demo" mode. This mode is intended to be used
only when a treadmill is displayed in a store. Whilst the
console is in the demo mode, the power cord can be
plugged in, the key can be removed from the console,
and the displays and indicators on the console will au-
tomatically light in a preset sequence, although the
buttons on the console will not operate. If a "d" appears
in the Heart Rate display whilst the information
mode is selected, press the Speed – button so the
display is blank.
To exit the information mode, remove the key from the
console.
23