Tire Terminology And Definitions - Dodge Challenger 2014 Owner's Manual

Hide thumbs Also See for Challenger 2014:

Table of Contents

342 STARTING AND OPERATING

Tire Terminology And Definitions

Cold Tire Inflation Pressure

Maximum Inflation Pressure

Recommended Cold Tire Inflation

Tire Placard

The vehicle B-Pillar is the structural member of the body located behind

the front door.

Cold tire inflation pressure is defined as the tire pressure after the ve-

hicle has not been driven for at least three hours, or driven less than 1

mile (1.6 km) after sitting for a three hour period. Inflation pressure is

measured in units of PSI (pounds per square inch) or kPa (kilopascals).

The maximum inflation pressure is the maximum permissible cold tire

inflation pressure for this tire. The maximum inflation pressure is

molded into the sidewall.

Vehicle manufacturer's recommended cold tire inflation pressure as

shown on the tire placard.

A paper label permanently attached to the vehicle describing the vehi-

cle's loading capacity, the original equipment tire sizes and the recom-

mended cold tire inflation pressures.

I n f o r ma t i o n P r o v i d e d b y :

Table of Contents