Advanced Screen; Cpu Configuration - ASROCK K8 Combo-Z User Manual

3.3
In this section, you may set the configurations for the following items: CPU
Configuration, Chipset Configuration, ACPI Configuration, IDE Configuration, PCIPnP
Configuration, Floppy Configuration, SuperIO Configuration, and USB Configuration.

3.3.1 CPU Configuration

CPU Host Frequency
Spread Spectrum
This Manual: http://www.manuallib.com/file/2448158

Advanced Screen

BIOS SETUP UTILITY
H/W Monitor
Main Advanced
Advanced Settings
WARNING : Setting wrong values in below sections
may cause system to malfunction.
CPU Configuration
Chipset Configuration
ACPI Configuration
IDE Configuration
PCIPnP Configuration
Floppy Configuration
SuperIO Configuration
USB Configuration
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Setting wrong values in this section may cause
the system to malfunction.
BIOS SETUP UTILITY
Advanced
CPU Configuration
CPU Host Frequency
Actual Frequency (MHz)
Spread Spectrum
Cool' n' Quiet
Processor Maximum Multiplier
Processor Maximum Voltage
Multiplier/Voltage Change
Memory Clock
Flexibility Option
Bank Interleaving
Burst Length
CAS Latency (CL)
TRCD
TRAS
TRP
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
While entering setup, BIOS auto detects the present CPU host frequency of
this motherboard. The actual CPU host frequency will show in the following
item.
This item should always be [Disabled] for better system stability.
Boot Security
Options for CPU
Enter Go to Sub Screen
F1
F9
F10
ESC
Select how to set the
[Auto] CPU host frequency.
[200]
[Disabled]
[Enabled]
x11
1.550 V
[Auto]
[Auto]
[Disabled]
[Auto]
[8 Beats]
[Auto]
+- +- Change Option Change Option
[Auto]
F1 F1 General Help General Help
[Auto]
F9 F9 Load Defaults Load Defaults
[Auto]
F10 F10 Save and Exit Save and Exit
ESC ESC
2 4
Exit
Select Screen
Select Item
General Help
Load Defaults
Save and Exit
Exit
Select Screen Select Screen
Select Item Select Item
Exit Exit