Table of Contents
Advertisement
Wireless LAN / Bluetooth / LTE (optional)
/ NFC radio components
The installation of radio components not approved by Fujitsu will invalidate
the certifications issued for this device.
Switching the wireless components on and off
The radio components are switched on and off via the corresponding functions of the operating system.
► To switch radio components on and off individually, select Settings – Change
PC settings – Network – Airplane mode.
Setting up WLAN access
•
Requirement: A WLAN must be available and you must have the
corresponding access information.
Information on configuring the WLAN access can be found in the
documentation for your operating system.
NFC (Near Field Communication)
Your Tablet PC is equipped with an integrated NFC chip. Near field communication is used
for contact-free data exchange by radio over short distances (a few centimetres).
Access via LTE (optional)
If you ordered an integrated LTE module with your system, you can enjoy optimum
reception and maximum energy efficiency without awkward cables or antennas. The
optional LTE module is ready for use straight away.
You will find information on establishing the connection with the LTE network in the
documentation for the hardware you plan to use.
Your device can connect with the Internet via LTE. To do this, use one of
the following types of connection:
•
Integrated LTE module (depending on your model variant)
•
a USB dongle (a USB stick with your mobile phone provider's SIM card)
•
a mobile end-device (e.g. mobile phone with Bluetooth or cable connection)
Fujitsu
Working with the Tablet PC
39
Advertisement
Table of Contents
