Page 1
USERʼS MANUAL Model No. NTIVEX70414.0 (White) Model N° NTIVEX80414 (Black) Serial No. : ___________ Serial No Decal Write the serial number in the space above for reference. QUESTIONS ? If you have questions, or if there are missing parts, please contact us:...
IMPORTANT PRECAUTIONS WARNING : To reduce the risk of serious injury, read all important precautions and instructions in this manual and all warnings on your bike before using it. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
The model number is NTIVEX70414.0 white ver- sion and NTIVEX80414.0 for Black version and For your benefit, read this manual carefully be- the location of the serial number decal are shown fore you use the bike.
ASSEMBLY Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and re- move the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included tool(s), assembly requires a Phillips screwdriver an adjustable wrench.
Page 6
STEP 1 Attach the front stabilizer (54) to the main frame (11) using two flat washer (65) and nut (66) and carriage bolt (64). Attach the rear stabilizer (59) to the main frame (11) using two flat washer (65) and nut (66) and carriage bolt (64).
Page 7
STEP 3 3.1 : Please remove the adjuster par (5) from the main frame (11). 3.2 : Release the screw from the lower sleeve and take of the sleeve from the handlebar post but do not take the sleeve off the lower sensor wire.
HOW TO USE THE EXERCISE BIKE HOW TO ADJUST THE ANGLE OF THE SEAT HOW TO ADJUST THE HORIZONTAL POSITION OF THE HANDLEBAR You can adjust the angle of the seat to the position that is most comfortable. You can also slide the seat To adjust the horizontal Handlebar forward or backward to increase your comfort or to...
HOW TO ADJUST THE PEDAL STRAPS HOW TO ADJUST THE HANDLEBAR POST To tighten the pedal straps (see the drawing on page If the console does not display correct feedback, the 4), simply pull the ends of the pedal straps. To reed switch should be adjusted.
Page 10
CONSOLE FEATURES SET : Press this button to set up the value of Time, Distance, Calories and Pulse. You can hold the button to increase the value faster. (The computer need to be in a stop condition). MODE : Press this button to confirm all settings and or to switch from one value to another one.
Page 11
Press again the MODE Button, if you want to add another target. 3. Start to workout. The console displays the elapsed time and the distance you’ve pedaled. 4. Follow your progress with the display. The console displays the elapsed time and the distance you’ve pedaled.
EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of time. During the first few minutes of exercise, your Before beginning this or any exercise pro- body uses carbohydrate calories for energy. Only af- gram, consult your physician.
PART LIST—Model No. NTIVEX70414.0 Item Qty. Description Item Qty. Description Hand post Cap for seat slider Screw M5*12 Seat Stopper for handlebar Sleeve for seat slider Handlebar Locknut for seat slider Adjuster par for handlebar Locknut block for seat slider Washer φ10.5xφ22x3.5t...
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...