Oki Pacemark 4410 Service Handbook page 187

2. Maintenance mode 1
(1) DIP Switch Settings
DIP Switch
(O: ON, X: OFF, –: ignored)
4
–
(2) Power ON Switch Function
ON- SHIFT CON-
LINE FIG
40496501TH Draft Version
3 2 1
– –
Maintence function enabled mode
Switch
PATH/ FF/ LF TEAR
TOF LOAD
The above switches are also valid during Limited Operation.
The empty boxes indicate not-pressed switches.
: indicates that the switch is pressed.
Function
Function
PARK
(Valid when DIP switch-1 is ON)
Starts learning function for slice level of
paper width sensor.
Starts auto-gap test.
Gap open/close test.
Starts gap close.
Starts ON/OFF test for all sensors.
Starts the alignment of print start position
sensor.
Resets the counter of print character
number
Starts AG correction mode.
Starts AG adjustment aid mode.
Flash Loading Mode
Starts aging mode (10 min.)
Starts aging mode (5 min.)
C-2