Fuse; A.c._Receptacle; Function_Switches - Mesa/Boogie Carbine M6 Owner's Manual

reAr PANeL CONTrOLS:
REAR_VIEW:_M6_CARBINE

FUSE:

This is the A.C. Mains Fuse for the M6 CARBINE. REPLACE ONLY WITH A SLO-BLO TYPE FUSE OF THE PROPER
RATING. THIS IS EXTREMELY IMPORTANT, AS THE M6 CARBINE DRAWS A SUBSTANTIAL AMOUNT OF CURRENT AT HIGH
OUTPUT LEVEL SETTINGS.
FUSE rating for USA - 10A S.B. / 120 Volts.

A.C._RECEPTACLE:

downs after the gig a snap. It also makes de-racking much easier when you wish to remove the unit from a hardwired rack system
where all the A.C. cords have been cable-tied in. Additional heavy duty cords are available should you ever need
one...simply call us and we can ship one directly to you for a nominal charge, plus shipping cost. Make sure the A.C.
cord is firmly in its socket (receptacle) before powering up the amplifier.
NOTE: NEVER ALTER THE THREE PRONG POWER CORD IN ANY WAY.

FUNCTION_SWITCHES:

from a master switching device. In this scenario, all sounds and features are controlled from one source and usually these com-
To_trigger_a_VOICE_mode_remotely_using_the_Function_Switches: Select VOICE position 3/ EXT SWITCH (straight up). Con-
nect a standard ¼" unshielded (speaker type) cable to the VOICE jack(s) of your choice and "ground the tip to the ring" of the
opposing end of the cable. The corresponding VOICE mode will be engaged and you will hear the sound change. In most master
switchers this will be as easy as connecting the cable, choosing an available program number, hitting a key to ground that jack, and
then pressing the Store or Enter key. If you find you only need to footswitch one of the voicings, you can use a simple one-button
footswitch, which are readily available at most music stores. If you can't locate one, call us and ask to speak to a Product Special-
ist and we can make you one for a nominal charge.
The removable "Euro" Style" A.C. cord that is supplied with the M6 CARBINE makes set-ups and tear-
These five ¼" jacks are provided to allow control of the Front Panel VOICE feature and Tuner MUTE
mands are stored in the master switcher under programs (usually midi) that can be recalled with one
footswitch keystroke.
The M6 CARBINE Function jacks respond to simple grounding type (tip-to-ground) latching (not mo-
mentary) logic and most switchers on the market offer several jacks that can be dedicated to this type of
logic.
PAGE_8