Rear Panel; Fuse; Ac Receptacle - Mesa/Boogie M-pulse Simul State Bass Amplifier Owner's Manual

REAR PANEL CONTROLS:
:
CAUTION Unplug power
M-PULSE TM SIMUL STATE BASS AMPLIFIER
before removing fuse or
TUBE DRIVEN-MOSFET POWER
bolts holding chassis
HANDBUILT IN PETALUMA, CALIFORNIA
POWER FUSE
120 V~ 12A
60 Hz SLO
12 A BLO
:
WARNING To reduce risk of fire or
electric shock, replace fuse with
same type and rating only. Do not
expose this unit to rain or moisture.

FUSE:

This is the A.C. Mains Fuse for the M-PULSE REPLACE ONLY WITH A SLO-BLO TYPE FUSE OF THE PROPER
RATING. THIS IS EXTREMELY IMPORTANT, AS THE M-PULSE DRAWS A SUBSTANTIAL AMOUNT OF CURRENT AT HIGH
OUTPUT LEVEL SETTINGS.
FUSE RATING (USA) 12 A S.B. / 120 VOLTS
:
CAUTION
Unplug power
before removing fuse or
bolts holding chassis

AC RECEPTACLE:

after the gig a snap. It also makes de-racking much easier when you wish to remove the unit from a hard wired rack system where all
the A.C. cords have been cabletied in. Additional heavy duty cords are available should you ever need one...simply call us direct and
we can ship one directly to you for a nominal charge, plus shipping cost. Make sure the A.C. cord is firmly in its
socket (receptacle) before powering up the amplifier.
NEVER ALTER THE THREE PRONG POWER CORD IN ANY WAY.
POWER FUSE
120 V~ 12A
60 Hz SLO
12 A BLO
NOTE: NEVER BLOCK OR ALTER AIR ANY OF THE VENTED AREAS ON THE REAR PANEL OF THE AMPLIFIER. Damage to
the unit is imminent and so is the risk of fire.
SLAVE OUT
SPEAKER OUTPUT
4 OHMS (2 OHM MINIMUM)
:
WARNING To reduce risk of fire or electric
shock, Do not remove cover. No user-
serviceable parts inside. Refer
servicing to qualified personnel.
The removable "Euro" Style" A.C. cord that is supplied with the M-PULSE makes set-ups and tear-downs
CAUTION: NEVER BLOCK AIR VENTS
CAUTION :
Unplug power
before removing fuse or
bolts holding chassis
POWER FUSE
120 V~
60 Hz
12 A
CAUTION: NEVER BLOCK AIR VENTS
LEVEL DIRECT OUT
LEVEL
POST
GROUND
LIFT
SUGGESTED LOAD
M-PULSE TM SIMUL STATE BASS AMPLIFIER
TUBE DRIVEN-MOSFET POWER
HANDBUILT IN PETALUMA, CALIFORNIA
12A
SLO
BLO
WARNING :
To reduce risk of fire or
electric shock, replace fuse with
same type and rating only. Do not
expose this unit to rain or moisture.
PAGE 10
EFFECTS
F.S. ON
PRE
0% 100%
RETURN SEND
WARNING :
To reduce risk of fire or electric
shock, Do not remove cover. No user-
serviceable parts inside. Refer
servicing to qualified personnel.
TUNER FOOT
OUTPUT SWITCH