Table of Contents
Advertisement
Available languages
Available languages
1800123494 FV42XX-FV43XX FTD US_110x154 20/06/11 16:24 Page5
To clean the iron
It is recommended that you clean the iron once a month to slow down scale build up and prolong
the life of the iron.
Clean your iron as noted below:
•
Unplug the iron, set the steam control lever to
•
Place the iron on its heel, set the temperature dial to MAX, plug in the iron and wait for the indicator light
to go out.
•
Unplug the iron and place it horizontally over a sink.
•
Press the
Self-Clean
•
Gently shake the iron over the sink until all of the water (along with impurities) runs out through
the soleplate.
•
At the end of the operation, put the anti-scale valve back into the iron and allow it to heat for 2 minutes
on its heel to dry the soleplate.
Never use abrasive or
aggressive products.
ejection button (
fig.14a
) and remove the anti-scale valve (
•
Unplug the iron. When the soleplate is slightly warm, wipe it with
a soft cloth.
and fill the water tank to MAX.
To clean the soleplate
5
fig.14b
).
Advertisement
Table of Contents
