Sceptre X505BV-FMQC User Manual page 50

Problems
PICTURE QUALITY
IS HORRIBLE!!
PICTURE HAS
PIXELS THAT ARE
ALWAYS
DISPLAYING THE
SAME COLOR
I CANNOT CHANGE
THE TIME
MANUALLY
BIG BLACK BOX IN
THE MIDDLE OF
SCREEN
SWITCHING A
CHANNEL OR
SOURCE CHANGES
THE VOLUME
THERE IS NOISE
OR TRASH PIXELS
ON THE SCREEN
TIPS FOR HIGH
DEFINITION USERS
TIPS FOR
LETTERBOX
CONTENT USERS
I CANNOT FIND THE
VOLUME AND
CHANNEL
CHANGING
BUTTONS
DISPLAY TURNS
OFF
AUTOMATICALLY
AFTER 10 MINUTES
For best image quality, view HD widescreen programs where
possible. If HD content is not available view "Standard
Definition" from a digital source. Standard, analog TV will
always be noticeable inferior to HD because your display has
video that is many times better than old TV's and so you can
see interference and deficiencies you did not KNOW you had.
Your display is manufactured using an extremely high level of
precision technology; however, sometimes some pixels of your
display may not show up. Pixels defects within industry
specifications are inherent to this type of product and do not
constitute a defective product.
Your display syncs time automatically according to your local
TV channel. This function only works while the (optional) TV's
tuner is connected to an ANTENNA.
You have turned on closed captioning and are using TEXT1 –
TEXT4. Change the setting to CC1 or turn off closed captioning
and the box will disappear. Refer to page 34 for more
information.
Different channels and inputs will sometimes have this effect
because the channel signal's own volume is already loud.
There is no way remove this completely. The display has an
AUTO VOLUME LEVEL function that can combat this type of
effect. Please make sure that function is turned on.
When your display's resolution is higher than the digital
channel's broadcast resolution, the signal is up-converted to
match your display's resolution. Up-converting can cause this
type of effect.
The display is an ideal platform for viewing High Definition
Content. The best image quality can be achieved by HDMI,
YPbPr (Component), then VGA. However, due to variances in
broadcast practices, it is possible some image distortions can
occur.
Letterboxed (Widescreen) versions of DVD movies are most
commonly formatted for standard 4:3 TVs. The display has the
capability of expanding this content so the entire screen is filled
at the expense of the image proportion. To use this function
press the aspect button on the remote control and cycle among
the available options.
The buttons are represented by the ▲▼◄► buttons located on
the remote control. ▲▼ changes the channels and ◄►
changes the volume.
The display features a power saving mode which will
automatically turn off the display, if there's no signal provided
for more than 10 minutes.
- 50 -
www.SCEPTRE.com
SCEPTRE X505 HD Display User Manual
Solutions