Sceptre X505BV-FMQC User Manual page 13

TV(optional) – This connection is for analog cable without the cable
7.
box or over-the-airwave antennas. The tuner is a hybrid tuner that
tunes to both analog and digital channels. This connection uses
coaxial RF cable. For over-the airwave digital stations please check
http://www.antennaweb.org. This tuner DOES NOT support QAM.
For digital cable, you WILL need a cable box.
HDMI1-3 – HDMI connects to devices that use HDMI cable, such as
8.
Blu-ray or HD DVD player, or HD cable / satellite set-top box. This
connection port receives pure digital audio and high definition signal
through one single cable. This port also can accept a HDCP video
device for video. HDMI 2 also doubles as the MHL connection for
cell phones. MHL is a protocol where the display will display what
your cell phone displays. If your cell phone supports MHL you can
purchase a MHL cable from any electronic store and connect it to
HDMI 2 and also your cell phone. Make sure the display's source is
changed to HDMI 2 and turn on your cell phone. You should see an
image of your cell phone screen. HDMI 2 also supports ROKU™
streaming stick. Plug the ROKU stick to HDMI 2, and switch your
source to HDMI2. Afterwards use the purple colored buttons to
access ROKU functions. HDMI 3 supports ARC (audio return
channel).
HEADPHONE – This connection is for headphones to be attached to
9.
the display.
Analog Audio Out – This connection is for connecting to analog
10.
audio receivers.
Please Note:

This display features a power saving function which will turn off
the display automatically after 10 minutes of idling on a
connection with no signal. This feature is present on all
connection.

This display does NOT support QAM under (optional) TV
tuner.
- 13 -
www.SCEPTRE.com
SCEPTRE X505 HD Display User Manual