Table of Contents
Advertisement
show
Environment
Variable
Variables
auto_action
bootdef_dev
boot_osflags
language
tta0_baud
tta1_baud
tta0_halts
tta1_halts
3–22 Console Commands
Description
Displays the console action following an
error, halt, or power-up: either halt, boot, or
restart.
Displays the device or device list from which
bootstrapping is attempted.
Displays the additional parameters to be
passed to system software.
Displays the language in which system
software and layered products are displayed.
Displays the baud rate for the console
terminal port.
Displays the baud rate for the auxiliary
serial port.
Displays the setting that indicates whether
you can halt the system from the console
terminal by pressing Ctrl/P or
Possible settings are:
•
0: Ctrl/P and
Break
•
2: Ctrl/P is enabled.
•
4:
is enabled.
Break
•
6: Ctrl/P and
Break
Displays the setting that indicates whether
you can halt the system from the device that
is connected to the auxiliary serial port by
pressing Ctrl/P. Possible settings are:
•
0: Ctrl/P is disabled.
•
2: Ctrl/P is enabled.
.
Break
are disabled.
are enabled.
Advertisement
Table of Contents
