DEC 4000 600 series Owner's Manual page 69

Variable Description
boot_osflags Sets additional parameters to be passed to
system software. When using OpenVMS
AXP software, these parameters are the
system root number and boot flags. When
using DEC OSF/1 AXP software, this
parameter is boot flag. The default setting
is null.
language Sets the language in which system software
and layered products will be displayed.
The default setting may vary depending on
where your system was manufactured. The
codes for the languages are:
tta0_baud Sets the baud rate for the console terminal
port. Possible settings are 600, 1200,
2400, 4800, 9600, or 19,200. This setting
is volatile: if you cycle power on the system,
the baud rate switch setting (behind the
operator control panel) overrides the tta0_
baud setting.
tta1_baud Sets the baud rate for the auxiliary serial
port. Possible settings are 600, 1200, 2400,
4800, 9600, or 19,200. The default setting is
9600.
0 none (cryptic)
30 Dansk
32 Deutsch
34 Deutsch (Schweiz)
36 English (American)
38 English (British/Irish)
3A Espanol
3C Francais
3E Francais (Canadian)
40 Francais (Suisse Romande)
42 Italiano
44 Nederlands
46 Norsk
48 Portugues
4A Suomi
4C Svenska
4E Vlaams
Console Commands 3–17
set