Smart Thinq - LG DLEX9500 Series Owner's Manual

9. The application now works to connect the appliance
and register it as a Wi-Fi product. A notification
appears when the dryer is successfully set up and
the product registration and Wi-Fi setup is complete.
The Wi-Fi connection indicator illuminates when the
machine connects to the home network.
NOTE
change the machine. Select Settings > Change Product
> Add Product and then follow steps 2–9 above.
Settings > Change Product > Add Product and then
follow steps 2–9 above.
Fi network, it may be too far from the router. Purchase
a Wi-Fi repeater (range extender) to improve the Wi-Fi
signal strength.
be interrupted because of the home network
environment.
depending on the Internet service provider. The
surrounding wireless environment can make the
wireless network service run slowly.
The application is subject to change for product
improvement purposes without notice to users.
SMART APPLIANCE CONNECTIVITY

Smart ThinQ

Use a smart phone to control the appliance remotely. Or
monitor the cycle operation to see the remaining time
left in the cycle.
NOTE
appliance in order to use the Remote Start function.
illuminated.
1. Press and hold the Remote Start button. The Remote
LED on the control panel is illuminated if the
appliance is connected to a Wi-Fi network.
2. Start a cycle from the application on a smart phone.
If the cycle is not started, the machine will wait to
start the cycle until it is turned off remotely from the
application or the Remote Start mode is disabled.
NOTE
appliance when the machine is in Remote Start
mode.
enable the Remote Start mode when the appliance is
turned off or the Remote Start mode is released.
Reduce energy costs from drying clothes by avoiding
peak usage periods, with information supplied by your
local electric utility company.
If your utility company has equipped your home with
Smart Grid technology, you will need to contact the
utility company for information regarding the Smart
Grid features.
NOTE
delays or extended cycle times during peak usage
periods.
NOTE
appliance in order to use the Smart Grid function.
43