Samsung SGH-U900 Service Manual page 36

5
1) Attach black tape like picture below.
※ Caution
1. Make sure not to cross over base line above.
2. Attach black tape like that way.
7
1) Contract LOWER screw.
※ Caution
1. Confirm screw size. (1.4* 2.5mm)
2. Screw after dashed positions are matched.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
6
1) Combine LOWER.
※ Caution
1. Insert FPCB between LOWER hole.
2. Combine top position HOOK and lower position
screw assembly part.
8
1) Assemble FRONT.
※ Caution
1. Insert SLIDE FPCB to dashed insertion hole
like upper picture.
2. Insert FRONT lower RIB under hinge and
match the six screw joint positions.
7-6
Exploded View and Parts List