Fuel Saving Tips - Bajaj Pulsar 150 DTS-i Owner's Manual

Hide thumbs Also See for Pulsar 150 DTS-i:
Table of Contents

Advertisement

How to Ride Your Bike
When stopping, always apply both brakes at the
same time. De-clutch as necessary to keep the
engine from stalling.
Stopping the Vehicle :
Close the throttle completely.
Shift the transmission into neutral.
Bring the vehicle to complete stop.
Turn the ignition switch off.
Parking :
Shift the transmission into neutral and turn the
ignition switch OFF.
Support the motorcycle on a firm level surface with
the center or side stand.
CAUTION : Do not park on a soft or steeply
inclined surface or the motorcycle may fall over.

Fuel Saving Tips

Drive smoothly and steadily at speed between 40
and 50 km/h .
Drive at constant speed; avoid sudden accelerations
& harsh braking as far as possible. Plan your trips
properly with minimum start-stops.
Change the gear judiciously according to the speed
requirements. Drive as far possible in highest gear.
13
Downloaded from
www.Manualslib.com
manuals search engine
Travel as light as possible; do not overload the
vehicle above the specified payload.
Stop the engine quickly at the end of the journey.
Avoid excessive idling. For intermediate stoppages,
cut-off the engine if you want to stop for more than
two minutes.
Ensure Following Vehicle Maintenance.
Vehicle Maintenance (Ensure Following)
Fuel
Check fuel lines and connections for
leakage.
Spark plug
Inspect and clean spark plug. Adjust
electrode gap.
Air filter
Clean air filter element periodically.
Engine oil
Check level. Use "Bajaj DTS-i
10000" high performance engine oil
for top up or refill.
Brakes
Ensure that the brakes are not
dragging / binding.
Clutch
Ensure correct clutch lever play.
Tyre pressure
Always maintain the recommended
tyre pressure.
Carburettor
Adjust idling speed.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents