Meridian 586 User Manual page 66

There are clicks when starting to play
a disc
If you are using a source other than DVD to control the DVD
player, check that it is configured as -C in Config. This
ensures that the Meridian preamplifier or control unit mutes
the sound when a disc is not playing.
If you are using a non-Meridian preamplifier the clicks are
unavoidable.
For more information see To configure another source to control
the DVD player, page 50.
There is no video output
Only one of the S-Video or COMPONENT video outputs is active
at any time, depending on the option selected in the VIDEO OUT
SEL. menu; see To select the video output format, page 40.
To change the menu option connect the COMPOSITE video
output, which is active irrespective of this setting, or use the
Video toggle configuration option; see To change the video
output format, page 49.
62
The on-screen display shows PLEASE
CHECK DISC when attempting to play
a disc
Check that the disc is positioned correctly in the drawer; see
To insert a disc, page 11.
If it is a single-sided disc check that the label is uppermost.
Check that it is not a recordable CD.
Try playing another disc. If this disc works, check the problem
disc for signs of dirt or damage.