Bluetooth - Yamaha SRT-1500 Owner's Manual

Problem
The image is not displayed on TV The HDMI cable is not securely connected.
screen.
The "This content can not be The HDMI IN jack on the TV, which is connected to the HDMI OUT (ARC)
viewed on your TV. Please jack on the unit, is not compatible with HDCP 2.2.
connect the TV which
corresponds to HDCP2.2 with
HDMI OUT of this unit." message
is displayed on the TV screen and
the input source does not play.
Menu screen of this unit is not The input switch of TV is not set correctly.
displayed.
A digital or high-frequency The unit may be placed close to digital equipment or high-frequency
equipment produces noises. equipment.
The HDMI control function does "HDMI Control" is set to "Off".
not work properly.
The HDMI control function is disabled on your TV.
The number of the connected HDMI devices exceeds the limit.
Audio delay control function is The TV does not support the audio delay auto adjustment feature.
not effective even "Audio Delay"
is set to "Auto".

Bluetooth

Problem
Cannot make the unit paired with the Bluetooth device.
Receiving/transmitting "Bluetooth" is set to "Off".
The device does not support A2DP.
The unit and device are too far apart.
There is a device (microwave oven, wireless LAN, etc.) outputs signals in
the 2.4 GHz frequency band nearby.
Another Bluetooth device is connected.
Receiving Bluetooth is not selected as the input source.
A Bluetooth adaptor, etc. that you want to pair with the unit has a password
other than "0000".
Transmitting "Transmission" is set to "Off".
Cause
Connect the HDMI cable properly.
Connect the unit to the HDMI IN jack that is compatible with HDCP 2.2 on a
TV.
Set the TV's input source to this unit.
Move the equipment away from the unit.
Set "HDMI Control" to "On".
Refer to the manual supplied with your TV and check the setting.
Disconnect some of the HDMI devices.
Adjust timing of sound output manually from "Audio Delay".
Cause
Set it to "On".
Perform paring operations with a device which supports A2DP.
Position the Bluetooth device so that it is less than 10 m (33 ft) from this unit
and pair the device with this unit.
Move this unit away from the device that is emitting radio frequency signals.
Terminate current Bluetooth connection, and perform pairing with the new
device.
Select Bluetooth as the input source.
Use a Bluetooth adaptor, etc. whose password is "0000".
Set it to "On".
Remedy
Remedy
APPENDIX ➤ Troubleshooting
See page
14, 15
14
17
–
50
–
–
49
See page
56
69
26, 28
–
27
21
26
56
62
En