Connecting A Mobile Device To The Unit Directly (Wireless Direct) - Yamaha SRT-1500 Owner's Manual

Connecting a mobile device to the unit directly (Wireless Direct)

Connect a mobile device directly to the unit without using a wireless
router (access point).
Wireless Direct supports the following.
– Operation of the unit using a mobile device to which the
dedicated HOME THEATER CONTROLLER (WLAN) app has
been installed.
– Use of AirPlay to play music files stored on an iOS device.
Mobile device
/
/
ENTER
• You cannot use Wireless Direct simultaneously with the wired network connection
(p. 30) or the wireless network connection (p. 31).
• When Wireless Direct is enabled, the unit cannot connect to the Internet.
Therefore, you cannot use any kind of Internet service such as Internet radio.
SETUP
1
z
Press the key to turn on this unit.
2
Turn on the TV and switch the TV input to display
video from the unit (HDMI OUT jack; p. 17).
3
Press the SETUP key twice.
The setup menu is displayed on the TV screen.
4
Use the
press the ENTER key.
5
Use the
and then press the ENTER key.
6
Use the
then press the ENTER key.
The unit
7
Use the
keys to select the encryption method.
Settings
None, WPA2-PSK (AES)
In most cases, "WPA2-PSK (AES)" should be selected. If
your mobile device does not support "WPA2-PSK (AES)",
select "None".
• As communications are not encrypted when "None" is selected, selecting
8
Use the
press the ENTER key.
• If you select "None" in step 7, this item is not available.
/ keys to select "Network", and then
/ keys to select "Network Connection",
/ keys to select "Wireless Direct", and
N e t w o r k C o n n e c t i o n
W i r e d
W i r e l e s s ( W i - F i )
W i r e l e s s D i r e c t
/ keys to select "Security" and the
this option poses the risk that third parties may access the unit without your
permission.
/ keys to select "Security Key" and
NETWORKS ➤ Connecting to a network
/
39
En