TACHOMETER CALIBRATION
Tachometer Quick CAL Calibration
3
2
RPM x 1000
1
0
SMART TOW
RESET
SELECT
SC1000 Smart Tow
Tachometer
This calibration is for setting lighting and contrast.
1. Press the "MODE/SELECT" and "+" buttons simultaneously
for approximately two seconds or until the "QUICK CAL"
screen appears.
2. Press the "-" or "+" button to select the option choice displayed
in the [ ] brackets on the screen.
3. Press "MODE/SELECT" ["SAVE"] to save the setting and
advance through the calibration screens.
LIGHT
(DOWN)
(SAVE)
CONTRAST
(DOWN)
(SAVE)
Tachometer CAL 1 Calibration
This calibration lets you turn the system screens on and off.
NOTE: The screens may vary depending upon the version of the
gauge.
4
5
6
7
Quick CAL
Adjusts the brightness of the gauge lighting.
( UP )
23517
Adjusts the contrast of the display screen.
( UP )
23519
2
RPM x 1000
1
0
TROLL
SC1000 System Tachometer
26
3
4
5
6
7
RESET
TROLL
-
+
MODE
24157