Tc/Ub Menu; Recording Menu - Sony PMW-F55 Operating Instructions Manual

TC/UB Menu

TC/UB
Menu items Sub items and setting values Contents
Timecode Mode
Preset / Regen
Setting the
timecode
Run
Rec Run / Free Run
Setting
Reset
Execute / Cancel
TC Format
DF / NDF
TC Display
Display Select
Timecode / Duration
Setting the time
data indication

Recording Menu

Recording
Menu items Sub items and setting values Contents
MPEG2 Proxy Setting
On / Off
Setting the
MPEG2 proxy
function
(PMW-F55 only)
Rec Control
Setting
SxS & AXS / AXS
Setting the
recording control
function
SDI Rec
Setting
Off / On
Control
Setting the SDI
recording control
function
Selects the timecode mode.
Preset: To start the timecode from the specified value
Regen (regeneration): To start the timecode by continuing the
timecode of the previous clip.
Rec Run: To advance the timecode during recording only.
Free Run: The timecode keeps advancing regardless of the
state of recording.
Sets the timecode to a desired value.
SET: Sets the value.
Resets the timecode to 00:00:00:00.
Execute: Execute this function.
Selects the timecode format.
DF: Drop frame
NDF: Non drop frame
Switches the time data indication.
Turns the MPEG2 proxy function on/off.
(This setting is available only when "Format" in "Rec
Format" of the System menu is set to "XAVC 4096 ×
2160P.")
Selects the target (internal recording memory or external
recording memory (AXS memory)) for performing the
recording control when "Main Operation" in "Base Setting"
of the System menu is set to "RAW."
Turns on/off this function that controls recording/stop
recording of the external device by the SDI output signal.
Setup Menu List 59