Flight Plans - Garmin gns 430 Quick Refence

To Create a New Flight Plan
1. Press F and rotate the small
right knob ( ) to display the flight
r
plan catalog.
2. Press m to display the flight plan
catalog options.
3. Rotate the large right knob (
E
press .
4. A blank flight plan page will appear for
the first empty storage location. Use
the small ( ) and large (
a
knobs to enter the identifier of the
departure waypoint and press
5. Repeat step #4 above to enter the identifier for each additional flight plan waypoint.
Once all waypoints have been entered, press the small right knob (
the flight plan catalog.
To Navigate a Flight Plan
1. Press F and rotate the small
right knob ( ) to display the flight
a
plan catalog.
2. Press the small right knob (
activate the cursor and rotate the
d
large right knob ( ) to highlight the desired flight plan.
3. Press m to display the flight plan catalog options.
12
4. Rotate the large right knob (
d
) to highlight “Create New Flight Plan?” and
d
) right
E .
) to
r
d
) to highlight “Activate Flight Plan?” and press

FLIGHT PLANS

To Stop Navigating a Flight Plan
F
1. Press
2. Press m
plan options.
3. Rotate the large right knob (
highlight “Delete Flight Plan?” and
E
press
confirm.
To Edit a Flight Plan
1. Press F
2. Press the small right knob (
3. Rotate the large right knob (
) to return to
v
4. To add a waypoint to the flight plan: Rotate the large right knob (
point where you wish to add the new waypoint. (If an existing waypoint is highlighted,
the new waypoint will be placed directly in front of this waypoint.) Use the small (
and large (
E .
5. To delete a waypoint from the flight plan: Rotate the large right knob (
the waypoint you wish to delete and press
firmation window. With “Yes” highlighted, press
6. Once all changes have been made, press the small right knob (
flight plan catalog.
E
.
.
to display the flight
d
) to
E
. Press again to
and rotate the small right knob ( ) to display the flight plan catalog.
a
) to activate the cursor.
r
d
) to highlight the desired flight plan and press
d
) right knobs to enter the identifier of the new waypoint and press
c
to display a “remove waypoint” con-
E
E
.
d
) to select the
)
a
d
) to select
to remove the waypoint.
) to return to the
r