Lubricant Specifications - Mercury 2000 Grand Marquis Owner's Manual

Ford motor company 2000 mercury grand marquis owner's guide

Table of Contents

Capacities and specifications

MERCON V. Refer to the Scheduled Maintenance Guide to determine

the correct service interval.

Indicates only approximate dry-fill capacity. Some applications may

vary based on cooler size and if equipped with an in-tank cooler. The

amount of transmission fluid and fluid level should be set by the

indication on the dipstick's normal operating range. Police Package refill

capacity-12.1L (12.8 quarts).

Use Ford Premium Engine Coolant (green in color). DO NOT USE Ford

Extended Life Engine Coolant (orange in color). Refer to Adding engine

coolant, in the Maintenance and Care chapter.

Rear axles are considered lubricated for life when the vehicle is used

for normal service. See your Scheduled Maintenance Guide for Severe

Duty requirements.

Traction-Lok axles use 1.6-1.8L (3.50-3.75 pints) of rear axle lubricant.

Add 118 ml (4 oz.) of Additive Friction Modifier C8AZ-19B546-A or

equivalent meeting Ford specification EST-M2C118–A for complete refill

of Traction-Lok rear axle.

Service refill capacities are determined by filling the rear axle 6 mm to

14 mm (1/4 inch to 9/16 inch) below the bottom of the filler hole.