CM47150MUK rev3_Layout 1 02/09/2011 14:12 Page 3
Using your coffee maker
Fill the Water Tank
maker.
Plug the coffee maker into the mains.
Insert the Filter Holder into the Brewing Head
turning anti-clockwise until it locks fully into place.
Place your cup(s) under the Coffee Dispenser (15).
Turn the Control Knob
begin brewing.
1 1
(5)
and place into the coffee
3
5 5
(4)
7
(2)
slowly to Coffee to
Ensure the On/Off Switch
(2)
are set to Off. Select Coffee (7).
Place the relevant Filter
(12)
Holder (14). Fill with espresso coffee and tamp
with Tamping Spoon (16), or use an E.S.E. pod.
Slide the On/Off Switch
(9)
to on. The Power Indicator
Light
(8)
illuminates. The Temperature Indicator Light
(6)
will turn off when the coffee maker is ready.
To stop turn the Control Knob to Off. Remove
the Filter Holder and clean.
2
(9)
and Control Knob
4
or
(13)
into the Filter
6
8
3