Chapter 8 Troubleshooting; How To Restart Your Network; Wireless Settings; Standard Led Behavior When The Router Is Powered On - ASROCK AC2600 G10 User Manual

Chapter 8 Troubleshooting

This section describes tips for troubleshooting some common problems.

8.1 How to Restart Your Network

When you need to restart your network, follow this sequence:
1. Turn off and unplug the modem.
2. Turn off the router
3. Plug in the modem and turn it on.
4. Turn on the router and wait.

8.2 Wireless Settings

Make sure that the wireless settings on the computer and router match exactly. The
wireless network name (SSID) and wireless security settings of the router and wireless
computer must match exactly.
If you set up an access list in the Advanced Wireless Settings screen, you must add each
wireless computer's MAC address to the router's access list.

8.3 Standard LED Behavior When the Router Is Powered On

After you turn on power to the router, the following sequence of events occurs:
Flashing Dark
Blue
Starting up
48
Solid Dark Blue Flashing Yellow
ADSL modem not
Connected to the
detected / WPS
internet
connection failed
Solid Yellow Flashing Light
Blue
Modem detected Connecting to
but no internet a WPS-enabled
connection device
Solid Light Blue
WPS connected