ASROCK AC2600 G10 User Manual page 15

Table of Contents

Advertisement

(2) Using WPS
WPS stands for Wi-Fi Protected Setup and it is a wireless networking standard that tries to
make connections between a router and wireless devices faster and easier.
Press and hold the WPS 2.4G/5G button on the rear of the G10 Gaming Router for more
than 5 seconds. The status LED on the front of the router will flash light blue at this stage.
If you use a handheld device, locate and press the WPS button
two curved arrows to connect.
If you use a computer, locate and select the Wi-Fi network name (SSID),
"ASRock" or "ASRock_5G". Select "Connect".
When WPS is connected successfully, the Status LED indicator on the front of the router
turns to a solid light blue.
*The WPS function may or may not be supported depending on your device.
LED Indicator Variations:
Successful Pairing:
5G WPS
2.4G WPS
Press the "WPS"
button
Pairing Failed:
5G WPS
2.4G WPS
Press the "WPS"
button
8
(Wi-Fi Protected Setup)
Pairing
(About 2 mins)
Pairing
(About 2 mins)
Pairing
successfully
(5 secs)
Pairing failed
(About 1 min)
shown as
WAN
connected
WAN
connected

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents