Asus B85M-VIEW PAKER User Manual page 59

Chassis Fan Profile [Standard]
This item appears only when you enable the Chassis Q‑Fan Control feature and allows you
to set the appropriate performance level of the chassis fan.
[Standard] Sets to [Standard] to make the chassis fan automatically adjust depending
on the chassis temperature.
[Silent] Sets to [Silent] to minimize the fan speed for quiet chassis fan operation.
[Turbo] Sets to [Turbo] to achieve maximum chassis fan speed.
[Manual] Sets to [Manual] to assign detailed fan speed control parameters.
The following four items appear only when you set Chassis Fan Profile to [Manual].
Chassis Fan Upper Temperature [70]
Use the <+> and <‑> keys to adjust the upper limit of the Chassis temperature. The
values range from 20ºC to 75ºC.
Chassis Fan Max. Duty Cycle(%) [100]
Use the <+> and <‑> keys to adjust the maximum chassis fan duty cycle. The values
range from 20% to 100%. When the chassis temperature reaches the upper limit, the
chassis fan will operate at the maximum duty cycle.
Chassis Fan Lower Temperature [20]
Displays the lower limit of the chassis temperature.
Chassis Fan Min. Duty Cycle(%) [20]
Use the <+> and <‑> keys to adjust the minimum chassis fan duty cycle. The values
range from 20% to 100%. When the chassis temperature is under 40ºC, the chassis
fan will operate at the minimum duty cycle.
2.7.6 Chassis Intrude Support [Disabled]
This item allows you to enable or disable the chassis intrusion detection function. Connect
one end of the chassis intrusion sensor or switch cable to the chassis instrusion connector.
The chassis intrusion sensor or switch cable sends high‑level signal to the connector when
a chassis component is removed or replaced. The signal is then generated as a chassis
intrusion event. Configuration options: [Disabled] [Enabled]
2.7.7 Anti Surge Support [Disabled]
This item allows you to enable or disable the Anti Surge function.
Configuration options: [Disabled] [Enabled]
ASUS B85M-VIEW PAKER
2-29