Handsfree Calling - Sony DSX-A50BT Operating Instructions Manual

Handsfree calling

Once the unit is connected to the cellular
phone, you can make/receive handsfree
calls by operating this unit.
Before handsfree calling, check the
following:
 Make sure that " " and " " appear in
the display.
 If " " and " " do not appear, perform
the connection procedure (page 18).
 If you cannot connect this unit and the
cellular phone via the Bluetooth
function, perform the pairing procedure
(page 17).
Receiving calls
When receiving a call, a ringtone is output
from your car speakers or the connected
cellular phone. The caller's name or phone
number appear in the display.
1
Press (handsfree) when a call is
received with a ringtone.
The phone call starts.
Notes
• Depending on the cellular phone, the caller's
name may appear.
20
• The built-in microphone of this unit is located
on the inner panel. Do not cover the
microphone with tape, etc.
Rejecting a call
Press and hold  for 1
second.
Ending a call
Press (handsfree) again.
Calling from the phonebook
You can make a call from the phonebook of
the cellular phone*.
* To access the cellular phone's phonebook from
this unit, the cellular phone must support PBAP
(Phone Book Access Profile).
1 Press  and rotate the control
dial until "PH BOOK" appears, then
press it.
The phonebook appears.
2
Rotate the control dial to select an
initial from the initial list, and then
press it.
3
Rotate the control dial to select a name
from the name list, and then press it.
4
Rotate the control dial to select a
number from the number list, and then
press it.
The phone call starts.