Bag Hook; Cargo Tie Down Rings - Mercedes-Benz 2011 E-Class Cabriolet Operator's Manual

Folding the rear seat backrest back
X
Move the driver's or front-passenger seat
forward if necessary.
!
Make sure that the seat belt does not
become trapped when folding the rear seat
backrest back. Otherwise, it could be
damaged.
X
Fold rear seat backrest : back until it
engages.
G
Warning!
Always lock the seat backrest in its upright
position when the rear seat bench is
occupied, or the extended cargo volume is not
in use.
Check for secure locking by pushing and
pulling on the seat backrest.
In an accident, during hard braking or sudden
maneuvers, loose items will be thrown around
inside the vehicle. This can cause injury to
vehicle occupants unless the items are
securely fastened in the vehicle.
To help avoid personal injury during a collision
or sudden maneuver, exercise care when
transporting cargo.
i You should always engage the rear seat
backrests if you do not need the through-
loading feature. This will prevent
unauthorized access to the trunk from the
vehicle interior.
X
Move the driver's or front-passenger seat
back if necessary.
Securing cargos

Cargo tie down rings

Observe the following notes on securing
loads:
secure the load using the cargo tie down
R
rings.
do not use elastic straps or nets to secure
R
a load, as these are only intended as an
anti-slip protection for light loads.
do not route tie downs across sharp edges
R
or corners.
pad sharp edges for protection.
R
The are four cargo tie down rings in the trunk
on the Coupe and two cargo tie down rings in
the trunk sill on the Cabriolet.
Example: Coupe
X
Coupe: fold up cargo tie down rings : next
to the rear seat backrest and push them
through the slits in the carpet.
Bag hooks
! The bag hook can bear a maximum load
of 6.6 lbs (3 kg). Do not use it to secure a
load.
Stowage areas
Z
253