Table of Contents
Advertisement
CH36BTA IB_E_23661
8/17/05 3:33 PM
Cleaning Your Air Conditioner
Wired Remote Controller
12
E-
Page 12
For the best use of your air conditioner, you must clean it every 2
weeks regularly to remove the dust that accumulates on the air filter.
IMPORTANT
1
Open the front grille by pushing the tabs on the grille.
IMPORTANT
2
Remove the front grille.
2-1 Remove the safety clips.
2-2 Open the front grille about 45° and pull it forward.
3
Pull out the air filter.
4
Remove all dust on air filter with a vacuum cleaner or a brush. In case of
serious dust accumulation, put the air filter in warm detergent water and
shake it vertically.
N N
o o
t t
e e
N N
o o
t t
e e
Safety Clip
5
Dry the air filter.
6
When you have finished, insert the filter into the front grille.
7
Clean the unit with a vacuum cleaner or a brush once a month.
8
Reinstall the front grille and the safety clips.
N N
N N
o o
o o
t t
t t
e e
e e
N N
o o
t t
e e
N N
o o
t t
e e
Wireless Remote Controller
Before cleaning your air conditioner, ensure that you have
switched off the electric circuit breaker used for the unit.
You must give attention when disassembling the front grille
and must check the safety clips have been installed.
If you do not check them, the front grille will drop suddenly
and you will be hurt.
When you have installed the Bio-Pure filter, do not allow
any liquids to contact the filter. It may lose its properties.
You can use all 4 points of the indoor unit for installing the
front grille and the safety clips depending on your requirement.
After cleaning the air conditioner, press the Filter Reset button.
Do not operate the air conditioner without the filter.
Hide quick links:
Advertisement
Table of Contents
