7/8) SATA_DOM0/1 (SATA DOM Jumper)
CAUTION! If a SATA type hard drive is connected to the motherboard, please ensure the
jumper is closed and set to 2-3 pins (Normal mode), in order to reduce any risk of hard disk
damage.
9) FLASH_DP1 (Flash Descriptor Security Jumper)
1
1-2 Close: Enable SATA0/SATA1 port DOM support.
1
2-3 Close: Normal mode. (Default setting)
1
1-2 Close: Flash Descriptor Security Overridden
1
2-3 Close: Flash Descriptor Security in effect.
(Default setting)
- 35 -
Hardware Installation